Interconnect Hardwire Combination Smoke & Carbon Monoxide Alarm with 10-Year Battery Backup
Features
- Finish: White
- Operating Voltage: 120V AC 60Hz
- Battery: 9V Lithium
- Temperature Range: 40°F (4.4°C) to 100°F (37.8°C)
- Humidity Range: 10% to 95% relative humidity (RH)
- Audio Alarm: 85dB at 10 feet
- Test/Silence: Electronically simulates smoke condition, causing the unit to alarm. Press and hold test/ silence button.
- Alarm Reset: Automatic when smoke clears
- Interconnections: Up to 18 units of First Alert or BRK Smoke, CO and Heat Alarms. Maximum of 12 smoke alarms. See user’s manual.
- Smoke Sensor: Ionization
- An ionization smoke sensing chamber and an electrochemical CO sensor
- The unit shall have an “End of Life” signal. This signal should be capable of temporarily being silenced for up to 2 days. After about 2 days, the signal will resume. After about 2 weeks the signal cannot be silenced.
- A visual power-on indicator to confirm unit is receiving AC power or has switched to battery backup mode. Separate LED ‘s to indicate a smoke or CO alarm
- The CO sensor is adjusted not to detect CO levels below 30 PPM and will not alarm when exposed to constant levels of 30 PPM for 30 days. It will alarm at the following levels: 400 PPM CO between 4 and 15 minutes, 150 PPM CO between 10 and 50 minutes and 70 PPM CO between 60 and 240 minutes
- Two Latching features: Alarm Latch to easily identify initiating alarm after alarm condition has subsided. Low battery latch: to visually identify which unit is in low battery condition. Two Silence Features: Alarm Silence to temporarily silence nuisance alarms. Low Battery Silence to silence low battery chirp for up to 8 hours.
- Two Locking features - tamper resistant locking pins that lock battery drawer and/ or alarm to mounting bracket. Battery drawer is shipped pre-locked so battery will not be discarded prematurely
Dimensions
- Diameter: 5.12"
- Height: 1.97"
- Weight: 0.55 lb
Warranty
- 10-Year Limited Warranty
Documents
Labels: